Difference between revisions of "OpenPilot for Tesla Model S/X with AP1"

From Tinkla: Tinkering with Tesla
(Created page with "==Quick Start== # Build an AP1 Harness (soon to be available from Comma) # Install the Comma two/Comma three in your windshield....")
 
m (Quick Start)
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
==Quick Start==
 
==Quick Start==
  
# Build an AP1 Harness (soon to be available from Comma)
+
# Build an [[AP1 Harness]] (soon to be available from Comma)
 
# [[Comma_devkit#Installing_the_Comma_devkit|Install the Comma two/Comma three]] in your windshield.
 
# [[Comma_devkit#Installing_the_Comma_devkit|Install the Comma two/Comma three]] in your windshield.
# Connect your [https://comma.ai/shop/products/three Comma Three] or [https://comma.ai/shop/products/two Comma Two] to the AP1 Harness using the Comma Relay box,
+
# Connect your [https://comma.ai/shop/products/three Comma Three] or [https://comma.ai/shop/products/two Comma Two] to the [[AP1 Harness]] using the Comma Relay box,
 
# Then [[Comma_devkit#Installing_OpenPilot_for_Tesla|install the Tesla version of OP]]
 
# Then [[Comma_devkit#Installing_OpenPilot_for_Tesla|install the Tesla version of OP]]
 
# [[Comma_devkit#Flash_your_Panda|Flash and patch]] your panda.
 
# [[Comma_devkit#Flash_your_Panda|Flash and patch]] your panda.
Line 12: Line 12:
 
* Please read and understand the [[Tinkla:General_disclaimer|Disclaimers and Licensing]].
 
* Please read and understand the [[Tinkla:General_disclaimer|Disclaimers and Licensing]].
  
* More info coming soon
+
With Tesla no longer paying any attention to the older Model S (the [https://en.wikipedia.org/wiki/Tesla_Autopilot#Hardware_1 AP1] was based on the MobileEye platform that Tesla dumped in October 2016 and has received limited code updates ever since), the only option to get new features and functionality is by joining our community and running the Tinkla branch of OpenPilot created specifically and only for Tesla vehicles.
 +
 
 +
<div style="text-align: center;">
 +
<youtube>z_Kon2P4yFs</youtube>
 +
</div>

Revision as of 21:44, 1 April 2022

Quick Start

  1. Build an AP1 Harness (soon to be available from Comma)
  2. Install the Comma two/Comma three in your windshield.
  3. Connect your Comma Three or Comma Two to the AP1 Harness using the Comma Relay box,
  4. Then install the Tesla version of OP
  5. Flash and patch your panda.
  6. Finally take your Tesla w/OP for a spin!

Improving your AP1

With Tesla no longer paying any attention to the older Model S (the AP1 was based on the MobileEye platform that Tesla dumped in October 2016 and has received limited code updates ever since), the only option to get new features and functionality is by joining our community and running the Tinkla branch of OpenPilot created specifically and only for Tesla vehicles.