Difference between revisions of "Tinkla Buddy"

From Tinkla: Tinkering with Tesla
m
m (What is Tinkla Buddy?)
Line 19: Line 19:
 
* and More!
 
* and More!
  
The entire Tinkla Buddy install costs about $200 USD, depending where your source components. There will be a subscription of $150 for the first year and $100 for each subsequent year. Subscription fees will be used to maintain the remote access and licensing server for the Remote App and other remote services.
+
=== Pricing ===
  
 +
==== Hardware ====
  
 +
The Tinkla Buddy hardware kit costs about $200 USD, depending where your source components.
  
 +
==== Software License ====
  
 +
Tinkla Buddy software license is a yearly subscription model locked to the VIN of the car, so if you replace the hardware on the same car it will still work, but will not work to move the license to another car.
  
 +
The cost of the Tinkla Buddy software subscription is:
 +
* $150 USD for the first year and
 +
* $100 USD for each subsequent year.
  
 
== Software Design History ==
 
== Software Design History ==

Revision as of 15:02, 5 September 2020

What is Tinkla Buddy? Tinkla Buddy Install Kit Installing your Tinkla Buddy Configuring your Tinkla Buddy


T Buddy.png

What is Tinkla Buddy?

Tinkla Buddy (formerly rPanda) is a nice solution for our Teslas to have Instrument Cluster [IC] integration without root.

If you don't have root access to your Tesla, you can now enjoy these benefits:

  • OpenPilot Integration into IC for pre-AP cars.
  • In car WiFi Access Point
  • Remote App (work in progress)
  • Vitals to Tinkla
  • Factory mode
  • and More!

Pricing

Hardware

The Tinkla Buddy hardware kit costs about $200 USD, depending where your source components.

Software License

Tinkla Buddy software license is a yearly subscription model locked to the VIN of the car, so if you replace the hardware on the same car it will still work, but will not work to move the license to another car. 

The cost of the Tinkla Buddy software subscription is:

  • $150 USD for the first year and
  • $100 USD for each subsequent year.

Software Design History

v1.36

  • Fix screenshot capturing script
  • Fix issues with detecting MCU1 vs MCU2
  • Added sound triggering capabilities on CID
  • Fix issues when running old firmware and cid-updater is not working anymore

v1.33

  • Tesla 2020.24.6.1 compatibility
  • Remote cron capabilities that allow you to run bash scripts on CID every 1, 5, 15 or 60 minutes (requires root persistence)
  • Fixes for persistence scripts to work well with 2020.20 and newer Tesla software
  • Speed/reliability improvements

v1.27

  • Fully boot without being connected to either IC or CID
  • Reduce number of QtCar restarts by detecting IC state
  • Increase automatically switch back to analog to 5 min to allow for buddy reboots without changes to IC
  • Increase number of checks for state of IC and CID before pulling Vitals

v1.26

  • Allow Buddy to boot without IC/CID on
  • Bug fix for IC not turning on after deep sleep

(Note: Vitals need to be re-enabled after each version upgrade)

v1.25

  • Bug fix for vitals without root on latest versions (up to 2020.12.11.5)
  • Bug fix with Factory Mode on latest versions (up to 2020.12.11.5)
  • Detects automatically if cars has AP hardware (1/2/2.5/3)
  • Detects automatically if car has MCU1 or MCU2 hardware
  • Vitals checking is an option now in Tinkla Menu and is disabled by default

v1.22

  • Fully redesigned networking stack for faster response on boot, activation and interaction
  • Now Tinkla Buddy can be installed between IC and MCU (IC <--> Buddy <--> MCU) or between MCU and APE (MCU <--> Buddy <--> APE) allowing it to work on both MCU1 and MCU2 cars.
  • Auto-detection of MCU type (Tegra vs Intel)
  • Auto-detection of AP type (pre-AP, AP1, AP2, AP2.5, AP3)
  • Auto-detection of installation location
  • Improved WiFi stability

v1.21

  • Fixes issue with starting persistence mode
  • LEDs now show status of tinklaBuddy and availability of valid cert

v1.20

  • Menu button trigger for Tinkla Menu for older (LIN based) steering wheel controls
  • Fixes brightness control
  • Resolves issue with crash when car would go in sleep mode