Tinkla Buddy

From Tinkla: Tinkering with Tesla
Revision as of 08:31, 20 March 2020 by BogGyver (talk | contribs)

Coming Soon

Tinkla Buddy is now in beta stage. Info coming soon!


Creating the SD card

  • On Windows PCs you can use Win32DiskImager to create to burn the image to the SD card for your Tinkla Buddy.
  • On Linux flavors (including Mac OS) you can just use the dd command.
dd if=tinkla_buddy.img of=/dev/dse

where tinkla_buddy.img is the name of the image you downloaded from this site and /dev/sde is the device corresponding to your SD card mounted on Linux.

Images

Please select the appropriate image for your platform.

Platform Image MD5sum
R1S H5 v1.21-H5 (built 03/20/2020) 6cafad602e2a07d87116f144862935e9
R1S H3 v1.21-H3 (built 03/20/2020) TBD

Note: the image file is very large (650+ Mb compressed) and will take some time to download. Also, depending on the speed of your SD card, will take a long time to burn.

History

v1.21

  • Fixes issue with starting persistence mode
  • LEDs now show status of tinklaBuddy and availability of valid cert

v1.20

  • Menu button trigger for Tinkla Menu for older (LIN based) steering wheel controls
  • Fixes brightness control
  • Resolves issue with crash when car would go in sleep mode