View source for SoftPanda

 To install and use the softPanda for IC/CID integration you have to have root access and mofiy important files on the IC and CID of your Tesla car. Please read carefully the whole document as well as the disclaimers. If you have questions or doubts, please reach out to our user group on the Comma.ai Tesla channel on Discord.

 DISCLAMER: Improper changes to IC or CID can result in the system (and thus your car) being rederend unusable. Potentially not even Tesla can revert some of the changes if done incorrectly. You are doing this at your own risk. You alone are ultimately responsible, not the creator of this site, Comma.ai, Comma.ai community, Tesla, or anyone else. 
=== Which source code branch is needed? ===

You will have to be on one of the branches in my [https://github.com/BogGyver/openpilot repo] that is based on OpenPilot 0.5.9 or above.


=== Changes to OpenPilot Configuration File ===

The following options must be set to true in the [[OpenPilot Configuration File]] for the IC/CID integration to work:

 use_tesla_gps = True
 use_tesla_map_data = True
 has_tesla_ic_integration = True
 # below is optional changes speedo from flying car to old non-ap gauge when EON is not connected; not implemented yet
 use_analog_when_no_eon = True

=== Download softPanda Executable ===

Dwnload the [http://tinkla.us/files/softPanda softPanda] Executable and place it in /var/root/run

=== Download Language Strings File ===

Find and download the QtCar_xx.qm specific to your language (for example English is '''en''') on both IC and CID and place it in '''/var/root/lang''' on both systems.

English - [http://tinkla.us/files/QtCar_en.qm QtCar_en.qm]

German - [http://tinkla.us/files/QtCar_de.qm QtCar_de.qm]

=== Changes on IC ===

 DISCLAMER: Improper changes to IC or CID can result in the system (and thus your car) being rederend unusable. Potentially not even Tesla can revert some of the changes if done incorrectly. You are doing this at your own risk. You alone are ultimately responsible, not the creator of this site, Comma.ai, Comma.ai community, Tesla, or anyone else. 

Add the following 4 lines at the top of your '''/var/etc/tesla.env'''. The language file should match the language set on your car and the file you downloaded above.

 /bin/mount | /bin/grep -c /var/root/lang/QtCar >/dev/null || /bin/mount --bind /var/root/lang/QtCar_en.qm 
 /usr/tesla/UI/bin/QtCar_en.qm
 QCPORT=":20201"
 export QCPORT



=== Changes on CID ===

 DISCLAMER: Improper changes to IC or CID can result in the system (and thus your car) being rederend unusable. Potentially not even Tesla can revert some of the changes if done incorrectly. You are doing this at your own risk. You alone are ultimately responsible, not the creator of this site, Comma.ai, Comma.ai community, Tesla, or anyone else. 

Add the following 4 lines at the top of your '''/var/etc/tesla.env'''. The language file should match the language set on your car and the file you downloaded above.

 /bin/mount | /bin/grep -c /var/root/lang/QtCar >/dev/null || /bin/mount --bind /var/root/lang/QtCar_en.qm 
 /usr/tesla/UI/bin/QtCar_en.qm
 QCPORT=":20201"
 export QCPORT

=== Updating Maps ===

==== Remove any old Map data: ====
If you have these files from the old Maps 3.x.x system in /opt/navigoff  delete them to free up space (otherwise rsync may run out of space); 5.5GB free space is required:

 dr-xr-xr-x 4 nvidia fuse 4.0K Dec 19  2016 NA
 dr-xr-xr-x 2 nvidia fuse  16K Dec 19  2016 lost+found
 -r--r--r-- 1 nvidia fuse   17 Dec 19  2016 FILESYNC.VERSION
 dr-xr-xr-x 2 nvidia fuse 4.0K Dec 19  2016 sound

==== Download Maps: ====

A high speed internet connection (wifi or LTE) is recommended, 3G will take a long time

 sudo rsync -r -v --progress --partial --append-verify spam@maps-1620467086.us-west-2.elb.amazonaws.com:/var/data/maps/NA-180906-1605/ /opt/navigoff/


=== Startup Script ===

Place in '''/var/root/scripts/setupSoftPanda.sh''' and make executable

 #!/bin/bash
 # mount /var/root/run on tmpfs to not wear down the eMMC flash chip
 
 SOFTPANDA_SOURCE=/var/spool
 SOFTPANDA_RUN=/var/root/run
 SOFTPANDA_ETC=/var/etc
 SOFTPANDALOCK=softPanda.lock
 SOFTPANDA=softPanda
 SHOULDRUN=0 
 
 mkdir -p $SOFTPANDA_RUN 
 
 ISTMPFS=`/bin/mount | /bin/grep -c "$SOFTPANDA_RUN type tmpfs"`
 
 #check if lock file exists
 if [ ! -f $SOFTPANDA_ETC/$SOFTPANDALOCK ]; then
     # no file, we can run
     SHOULDRUN=1
 else
    # we have file, check file age
    while ! test `find "$SOFTPANDA_ETC/$SOFTPANDALOCK" -mmin +10`
    do
       # file is old enough
       echo "File not old enough! Waiting;"
       sleep 60
    done
    SHOULDRUN=1
 fi 
 
 if [ $ISTMPFS  -eq 0 ]; then
   /bin/mount -t tmpfs -o size=10M,mode=0755 tmpfs $SOFTPANDA_RUN
 fi
 
 if [ $SHOULDRUN -eq 1 ]
 then
   touch $SOFTPANDA_ETC/$SOFTPANDALOCK
   echo "Set final GUI and DAS settings"
   sudo edit-settings-conf.pl -a vapi/forceHasAutopilot=true
   sudo edit-settings-conf.pl -a vapi/forceHasDriveOnNav=true
   sudo edit-settings-conf.pl -a vapi/forceHasDriveOnNavMaps=true
   sdv GUI_autopilotAlwaysOn true
   sdv GUI_autosteerOnRequest true
   sdv GUI_autosteerDisabled false
   sdv GUI_accFromZero true
   sdv DAS_mapAvailability true
   sdv GUI_redLightStopSignOnRequest true
   sdv GUI_enableMapStops true
   sdv GUI_enableVisionStops true
   sdv GUI_enableFSDFunctions true
   sdv GUI_stopAndGo true
   sdv GUI_noaEverywhere true
   sdv DAS_navAvailable true
   sdv GUI_accFollowDistance 2
   sdv GUI_accOvertakeOnRequest true
   sdv GUI_autopilotControlRequest 0
   sdv FEATURE_dasDriveOnNavEnabled true
   sdv FEATURE_dasDriveOnNavMapsOkay true
   sdv VAPI_backupCameraCalibrated true
   sdv VAPI_fisheyeCameraCalibrated true
   sdv VAPI_lPillarCameraCalibrated true
   sdv VAPI_lRepeaterCameraCalibrated true
   sdv VAPI_mainCameraCalibrated true
   sdv VAPI_narrowCameraCalibrated true
   sdv VAPI_rPillarCameraCalibrated true
   sdv VAPI_rRepeaterCameraCalibrated true
 
   cp $SOFTPANDA_SOURCE/$SOFTPANDA $SOFTPANDA_RUN
   chmod 755 $SOFTPANDA_RUN/$SOFTPANDA
   /usr/local/bin/emit-reboot-cluster
   $SOFTPANDA_RUN/$SOFTPANDA -bridge 20201 -dasHw 1 -hBridge 31515 -includeParrot -includeLb -modifyDiState -forwardDebug -forwardUnique
 fi


=== Changing the crontab ===

 DISCLAMER: Improper changes to IC or CID can result in the system (and thus your car) being rederend unusable. Potentially not even Tesla can revert some of the changes if done incorrectly. You are doing this at your own risk. You alone are ultimately responsible, not the creator of this site, Comma.ai, Comma.ai community, Tesla, or anyone else. 

In order to start the script you need to modify your crontab. To make the script always-running:

 sudo crontab -e

Then insert:

 @reboot /sbin/start-stop-daemon --start --quiet --make-pidfile --oknodo --background --pidfile /var/run/proxy.pid --exec /bin/bash /var/root/scripts/setupSoftPanda.sh
 */1 * * * * /sbin/start-stop-daemon --start --quiet --make-pidfile --oknodo --background --pidfile /var/run/proxy.pid --exec /bin/bash /var/root/scripts/setupSoftPanda.sh

=== A simple restart script ===

The softPanda startup script creates a lock file and prevents two restarts in less than 10 minutes to allow you to still access your car computers in the event of a mistake. To manually restart the process you have to delete the lock file and then kill the softPanda process. Or just create a bash file with this content and run it.

 PID=`ps -ef | grep softPanda | grep bridge | awk -F'[ ,]+' '{print $2}'`
 if [ $PID -gt 0 ]
 then
   rm /var/etc/softPanda.lock
   kill -9 $PID
 fi

=== Optional Flags ===

Here are the optional flags for softPanda EtherCan Proxy

* -runOnIc: sets the spammer to run on IC instead of CID (CID default)
* -triggerOnCan: start the spam only when receiving a certain CAN message from EON (OFF by default)
* -autoRestartQtCarCluster: sends command to restart QtCarCluster when app starts (OFF by default)
* -onlyCarConfig3: sends spam only for DasHw in GTW_carConfig3 (OFF by default)
* -spamFrequency XX: spam frequency in Hz (100Hz by default)
* -autopilot Y: autopilot mode (1:Highway, 2:Enhanced DEFAULT, 3:SelfDrive)
* -bridge ZZZZZ: bridge mode where the packets received on 20101 are sent to port ZZZZZ (20102-27000)
* -hBridge ZZZZZ: bridge mode where the packets received on 31415 are sent to port ZZZZZ (31515-32000)
* -sendAfterReceive: sends modded message right after it is received (OFF by default)
* -bindToPort WWWWW: Binds to a certain port and local IP address for sending (OFF by default)
* -sendDiAccStatus: Send the DI_accStatus message; experimental for now (OFF by default)
* -modifyDiState: Modifies the DI_state message for long control showing on IC (OFF by default)
* -includeParrot: Include data from parrot to be sent through the bridge (OFF by default)
* -includeLb: Include data from LB to be sent through the bridge (OFF by default)
* -forwardDebug: forward also the debug messages show in Developer Mode (OFF by default)
* -forwardUnique: forward only unique CAN messages in each direction (OFF by default)

=== Help, All Screens Are Black! ===

It’s not uncommon to see both IC and CID black the first time you start your car after enabling everything. This is caused by the CID not receiving messages from the gateway to wake up, which in turn is caused by softPanda having either not started or crashed. (Remember in the steps above we tell the CID to only listen to the gateway on the port softPanda proxies data to it on). The car will still drive with no screens, if you push the brake and wait 30 seconds for the gateway to give up trying to contact the screens.

Quickfix: Reboot the CID using the steering wheel (sometimes the speakers give a slight pop when the reboot command is executed).   If everything is setup properly, the screens should come up.  Steering wheel reboots are not preferred as they aren’t graceful restarts.

Preferred fix: ssh into the CID and restart softPanda, or troubleshoot what happened and then restart it.