Difference between revisions of "Tinkla Buddy"
From Tinkla: Tinkering with Tesla
m (→Disk Images) |
m (→Creating the SD card) |
||
| Line 9: | Line 9: | ||
<source> | <source> | ||
dd if=tinkla_buddy.img of=/dev/dse status=progress | dd if=tinkla_buddy.img of=/dev/dse status=progress | ||
| − | </source> where '''tinkla_buddy.img''' is the name of the image you downloaded from this site and '''/dev/sde''' is the device corresponding to your SD card mounted on Linux. | + | </source> where '''tinkla_buddy.img''' is the name of the disk image you downloaded from this site and '''/dev/sde''' is the device corresponding to your SD card mounted on Linux. |
=== Disk Images === | === Disk Images === | ||
Revision as of 08:35, 20 March 2020
Coming Soon
Tinkla Buddy is now in beta stage. Info coming soon!
Creating the SD card
- On Windows PCs you can use Win32DiskImager to create to burn the image to the SD card for your Tinkla Buddy.
- On Linux flavors (including Mac OS) you can just use the dd command.
dd if=tinkla_buddy.img of=/dev/dse status=progresswhere tinkla_buddy.img is the name of the disk image you downloaded from this site and /dev/sde is the device corresponding to your SD card mounted on Linux.
Disk Images
Please select the appropriate image for your device.
| Device | Image | MD5sum |
|---|---|---|
| R1S H5 | v1.21-H5 (built 03/20/2020) | 6cafad602e2a07d87116f144862935e9 |
| R1S H3 | v1.21-H3 (built 03/20/2020) | TBD |
Note: the image file is very large (650+ Mb compressed) and will take some time to download. Also, depending on the speed of your SD card, will take a long time to burn.
History
v1.21
- Fixes issue with starting persistence mode
- LEDs now show status of tinklaBuddy and availability of valid cert
v1.20
- Menu button trigger for Tinkla Menu for older (LIN based) steering wheel controls
- Fixes brightness control
- Resolves issue with crash when car would go in sleep mode
