Difference between revisions of "Tinkla Relay"
(Created page with "About") |
m |
||
| Line 1: | Line 1: | ||
| − | + | Do you like Tinkering with your Tesla? Do you like adding additional features to it without having to install old style switches to control them? Do you want to control additional lights or devices based on specific conditions of the car (charging, driving, turning left/right, ger forward/reverse, high beams on, blind spot monitoring signals, or specific button presses on the steering wheel)? Then Tinkla Relay is a must have Swiss Army Knife for Tesla Model S/X integrations (and very SOON Model 3/Y). | |
| + | |||
| + | Tinkla Relay is a device that connects to your Tesla power and CAN and has 4 output relays that are turned on/off based on your settings configured via DIP switches. The maximum output for the relays is 12V and up to 3A total between all on channels at a time. This is enough to drive GPIO signals, trigger relays for larger consumers or turn on notification LEDs. | ||
| + | |||
| + | |||
| + | __NOTOC__ | ||
| + | [[Talk: Feedback? Ideas? Comments?]] | ||
| + | |||
| + | Services: [[Tokens: Tesla Root Tokens|Tokens]] | [[Vitals: Tesla Vitals|Vitals]] | OpenVPN | Tesla Remote | [[Installed OP Instances|Installs]] | | ||
| + | |||
| + | <big><big>Quick Start</big></big><br /> | ||
| + | # The [[Tesla Giraffe|Tesla Giraffe install guide]] will start your journey to driving with OpenPilot. | ||
| + | # Plug your [https://comma.ai/shop/products/panda-obd-ii-dongle Comma.ai Panda] into your Giraffe | ||
| + | # Then [[EPAS Harness|make and install the EPAS Harness]]. | ||
| + | # [[EON#Installing_the_EON|Install the EON]] in your windshield. | ||
| + | # Then [[EON#Installing_OpenPilot_for_Tesla|install the Tesla version of OP]] | ||
| + | # Finally take your Tesla w/OP for a spin! | ||
| + | # And if you want to have IC integration (root access not required), now you can with [[Tinkla Buddy]] | ||
| + | |||
| + | == Getting Pre-AP up to AP1 == | ||
Revision as of 21:24, 14 February 2022
Do you like Tinkering with your Tesla? Do you like adding additional features to it without having to install old style switches to control them? Do you want to control additional lights or devices based on specific conditions of the car (charging, driving, turning left/right, ger forward/reverse, high beams on, blind spot monitoring signals, or specific button presses on the steering wheel)? Then Tinkla Relay is a must have Swiss Army Knife for Tesla Model S/X integrations (and very SOON Model 3/Y).
Tinkla Relay is a device that connects to your Tesla power and CAN and has 4 output relays that are turned on/off based on your settings configured via DIP switches. The maximum output for the relays is 12V and up to 3A total between all on channels at a time. This is enough to drive GPIO signals, trigger relays for larger consumers or turn on notification LEDs.
Talk: Feedback? Ideas? Comments?
Services: Tokens | Vitals | OpenVPN | Tesla Remote | Installs |
Quick Start
- The Tesla Giraffe install guide will start your journey to driving with OpenPilot.
- Plug your Comma.ai Panda into your Giraffe
- Then make and install the EPAS Harness.
- Install the EON in your windshield.
- Then install the Tesla version of OP
- Finally take your Tesla w/OP for a spin!
- And if you want to have IC integration (root access not required), now you can with Tinkla Buddy
