Difference between revisions of "Template:Getting Started"

From Tinkla: Tinkering with Tesla
(Installing Giraffe)
Line 7: Line 7:
 
If you are looking to get your EON up and running see the following guides
 
If you are looking to get your EON up and running see the following guides
  
== Installing Giraffe ==
+
== Installing a Giraffe ==
 +
There are currently two options concerning Giraffes for your Model S.
 +
# Giraffe revC from @AsianTea#7596 on the [https://discordapp.com/invite/Wyna3qy Comma.ai discord]
 +
#* This solution doesn't need any modification to perform a Radar retrofit.
 +
# An EPAS harness from [https://www.ebay.com/str/level2tesla Flyboy222pa]
 +
#* This path doesn't require a Giraffe.
 +
#* But this will require a 120 Ohm resistor if you want to install a Radar retrofit.
 +
#* This route can skip to Installing the EPAS cable.
 +
# Giraffe For cars built before May 31, 2013, will need a "TDC Connector".
 +
 
 +
===
 +
 
 
== Installing EON ==
 
== Installing EON ==
 
== Installing OpenPilot on the EON ==
 
== Installing OpenPilot on the EON ==

Revision as of 04:09, 16 December 2019

Work in Progress
This page is the first pass at replacing the Main Page "Getting Started" section.

Quick Start
If you are looking to get your EON up and running see the following guides

Installing a Giraffe

There are currently two options concerning Giraffes for your Model S.

  1. Giraffe revC from @AsianTea#7596 on the Comma.ai discord
    • This solution doesn't need any modification to perform a Radar retrofit.
  2. An EPAS harness from Flyboy222pa
    • This path doesn't require a Giraffe.
    • But this will require a 120 Ohm resistor if you want to install a Radar retrofit.
    • This route can skip to Installing the EPAS cable.
  3. Giraffe For cars built before May 31, 2013, will need a "TDC Connector".

=

Installing EON

Installing OpenPilot on the EON

Configuring OpenPilot

First OpenPilot Drive

Hardware Guide

Software Guide

FAQ