Template:Getting Started

From Tinkla: Tinkering with Tesla
Revision as of 04:22, 16 December 2019 by F. John (talk | contribs)

Work in Progress
This page is the first pass at replacing the Main Page "Getting Started" section.

Quick Start
If you are looking to get your EON up and running see the following guides

Installing a Giraffe

There are currently three options concerning Giraffes for your Model S.

  1. Giraffe revC from @AsianTea#7596 on the Comma.ai discord
    • This solution doesn't need any modification to perform a Radar retrofit.
  2. An EPAS harness from Flyboy222pa
    • This path doesn't require a Giraffe.
    • But this will require a 120 Ohm resistor if you want to install a Radar retrofit.
  3. Giraffe For cars built before May 31, 2013, will need a "TDC Connector".

Whichever one of these you end up using, install it into the corresponding port under the dash, by the driver's side door.


Installing EON

Installing OpenPilot on the EON

Configuring OpenPilot

First OpenPilot Drive

Hardware Guide

Software Guide

FAQ

Retrieved from "https://tinkla.us/index.php?title=Template:Getting_Started&oldid=563"